https://geekwhitenorth.com/2020/06/10/the-thing-about-e-ink-displays/https://geekwhitenorth.com/wp-content/uploads/2020/06/e-ink-circles-e1592363162467.pngE-ink-CirclesIt is possible to draw images with simple lines, triangles, squares and circles but it takes a bit of work to align everything.2021-10-01T02:21:34+00:00monthlyhttps://geekwhitenorth.com/2020/06/22/the-case-of-the-odd-sized-display/2020-06-19T04:05:17+00:00monthlyhttps://geekwhitenorth.com/2020/06/12/e-paper-display-what-is-it-good-for-absolutely-nothing-well-not-quite/2020-06-17T03:26:00+00:00monthlyhttps://geekwhitenorth.com/2020/04/09/fantastic-teeth-and-where-to-find-them/https://geekwhitenorth.com/wp-content/uploads/2020/04/toothpasteharry.pngToothpasteHarrySqueeze the last drophttps://geekwhitenorth.com/wp-content/uploads/2020/04/toothpasteharry1.pngToothpasteHarry1Almost looks scaryhttps://geekwhitenorth.com/wp-content/uploads/2020/04/harrypotterkeychain.pngHarryPotterKeychainInspired by this keychain2020-04-09T00:42:18+00:00monthlyhttps://geekwhitenorth.com/2016/10/04/air-supply/https://geekwhitenorth.com/wp-content/uploads/2016/10/ramps-fan-e1475460813883.jpgramps-fanKeeping the Stepper motor drivers cool2020-03-26T01:15:46+00:00monthlyhttps://geekwhitenorth.com/2019/01/24/reduced-to-printing-on-small-printer/https://geekwhitenorth.com/wp-content/uploads/2019/01/megakaptontape.pngmegakaptontapeLarge roll of Kapton tapehttps://geekwhitenorth.com/wp-content/uploads/2019/01/kaptonbedcover.pngkaptonbedcoverKapton tape covering the bed 2020-03-26T01:15:04+00:00monthlyhttps://geekwhitenorth.com/2019/03/26/if-youre-happy-and-you-know-it-clamp-your-heat-sink/https://geekwhitenorth.com/wp-content/uploads/2019/03/extruder-mount.pngExtruder-mountBowden hot end with clamp2020-03-26T01:14:34+00:00monthlyhttps://geekwhitenorth.com/2019/03/28/adventures-in-bowden-country/https://geekwhitenorth.com/wp-content/uploads/2019/03/bowdenextruder-2.pngBowdenExtruder-2An alternative bowden extruder2020-03-26T01:13:44+00:00monthlyhttps://geekwhitenorth.com/2020/03/18/this-makes-me-very-angry-very-angry-indeed/https://geekwhitenorth.com/wp-content/uploads/2020/03/martian.jpgmartianVery angry2020-03-11T03:17:04+00:00monthlyhttps://geekwhitenorth.com/2020/03/11/it-took-a-while-but-upgrades-are-done/https://geekwhitenorth.com/wp-content/uploads/2020/03/printingagain.jpgPrintingAgainOddles of spooleshttps://geekwhitenorth.com/wp-content/uploads/2019/10/bowdentube.pngBowdenTubeWhere has the big wheel gone?https://geekwhitenorth.com/wp-content/uploads/2019/10/calibrationcubes.pngCalibration CubesStill some work needed but it is getting better with each iteration.2020-03-11T03:00:04+00:00monthlyhttps://geekwhitenorth.com/2019/03/22/filament-holder-chainsaw-massacre/https://geekwhitenorth.com/wp-content/uploads/2019/03/filament_roller.pngSkateboard bearing Filament holderYes it was chopped in half, then joined together with a piece of meccano2019-03-22T02:32:11+00:00monthlyhttps://geekwhitenorth.com/2019/03/17/tinker-soldier-tailor-tinker/https://geekwhitenorth.com/wp-content/uploads/2019/03/wadeextuder.pngWadeExtuderIs my Wade extuder out of date when compared to other extuders2019-03-17T03:34:46+00:00monthlyhttps://geekwhitenorth.com/2019/01/19/stepper-motor-fail-on-3d-printer/https://geekwhitenorth.com/wp-content/uploads/2019/01/wade-extruder.jpegwade-extruderWade extruder with offending stepper motor 2019-01-20T01:35:34+00:00monthlyhttps://geekwhitenorth.com/2017/05/22/configuration-time/https://geekwhitenorth.com/wp-content/uploads/2017/05/snotball-e1494731395238.jpgSnotballMolten plastic ballhttps://geekwhitenorth.com/wp-content/uploads/2017/04/filament-e1502936711788.jpgfilamentGravity feed2017-08-17T02:28:05+00:00monthlyhttps://geekwhitenorth.com/2010/03/24/nose-buried-in-an-lcd-screen/2017-08-17T02:16:04+00:00monthlyhttps://geekwhitenorth.com/2009/03/25/newcastle-makerfaire-2009/https://geekwhitenorth.com/wp-content/uploads/2009/03/c5a32-mechanicalhorse1.jpgc5a32-mechanicalhorseHi-Yo, Silver! Away!2017-08-17T02:14:57+00:00monthlyhttps://geekwhitenorth.com/2009/07/01/maker-faire-san-francisco/https://geekwhitenorth.com/wp-content/uploads/2009/07/wild-beast2.jpgwild beast2Wild thing you make my heart singhttps://geekwhitenorth.com/wp-content/uploads/2009/07/teslacar.jpgteslacarChassis of a Tesla. This is what you get for all that moneyhttps://geekwhitenorth.com/wp-content/uploads/2009/07/bouncylegs2.jpgbouncylegs2Springing into action2017-08-17T02:14:53+00:00monthlyhttps://geekwhitenorth.com/2010/07/11/k9-and-meatballs/https://geekwhitenorth.com/wp-content/uploads/2010/07/k92.jpgk92High tech steam punk stylehttps://geekwhitenorth.com/wp-content/uploads/2010/07/k91.jpgk91K9 steam punk style2017-08-17T02:14:43+00:00monthlyhttps://geekwhitenorth.com/2011/06/17/time-sink/https://geekwhitenorth.com/wp-content/uploads/2011/06/little-robot.jpglittle robotRobot Radio2017-08-17T02:14:38+00:00monthlyhttps://geekwhitenorth.com/2017/04/05/140watts-should-be-enough-for-anyone/https://geekwhitenorth.com/wp-content/uploads/2017/03/heatbed.jpgHeatbedNew bed but no pillows2017-08-17T02:01:58+00:00monthlyhttps://geekwhitenorth.com/2007/01/05/talkie-toaster/https://geekwhitenorth.com/wp-content/uploads/2007/01/talkie-toaster.jpgtalkie toasterA tea cake?2017-08-17T01:54:33+00:00monthlyhttps://geekwhitenorth.com/2007/01/05/talkie-electronics/2017-08-17T01:54:28+00:00monthlyhttps://geekwhitenorth.com/2007/01/05/talkie-toaster-pictures/2017-08-17T01:54:25+00:00monthlyhttps://geekwhitenorth.com/2007/01/05/short-videos-of-talkie-toaster-in-action/2017-08-17T01:54:20+00:00monthlyhttps://geekwhitenorth.com/2007/01/10/a-series-of-tubes-just-like-the-internet/https://geekwhitenorth.com/wp-content/uploads/2007/01/fa301-bodytube1.jpgfa301-bodytube1neck size 25https://geekwhitenorth.com/wp-content/uploads/2007/01/f3b66-bodyandhead1.jpgf3b66-bodyandhead1Head and body above the resthttps://geekwhitenorth.com/wp-content/uploads/2007/01/6b999-headtube1.jpg6b999-headtube1Prototype benders body2017-08-17T01:54:17+00:00monthlyhttps://geekwhitenorth.com/2007/01/21/i-have-my-eye-on-you/https://geekwhitenorth.com/wp-content/uploads/2007/01/3f3aa-eyes1.jpg3f3aa-eyes1Eye ball movements2017-08-17T01:54:13+00:00monthlyhttps://geekwhitenorth.com/2007/03/07/bender-what-a-doll/https://geekwhitenorth.com/wp-content/uploads/2007/03/f4a34-phot0049.jpgf4a34-phot0049Prototype Bender for size proportions2017-08-17T01:54:09+00:00monthlyhttps://geekwhitenorth.com/2007/03/15/benders-shoe-size-is-58/https://geekwhitenorth.com/wp-content/uploads/2007/03/fdfe6-imgp0046.jpgfdfe6-imgp0046Prototype intended to be Benders foot2017-08-17T01:54:05+00:00monthlyhttps://geekwhitenorth.com/2007/03/15/dome-ray-me-far-so-lar-tee-dome/https://geekwhitenorth.com/wp-content/uploads/2007/03/75a70-imgp0044.jpg75a70-imgp0044Plastic dome for top of headhttps://geekwhitenorth.com/wp-content/uploads/2007/03/265da-imgp0045.jpg265da-imgp0045Interstellar craft or just a tube of paper with a dome?2017-08-17T01:54:01+00:00monthlyhttps://geekwhitenorth.com/2007/03/19/doh-its-benders-head/https://geekwhitenorth.com/wp-content/uploads/2007/03/4789c-benderw_glasses1.jpg4789c-benderw_glasses1Bender head fit test2017-08-17T01:53:56+00:00monthlyhttps://geekwhitenorth.com/2007/05/29/talkie-toaster-you-will-be-upgraded/2017-08-17T01:53:52+00:00monthlyhttps://geekwhitenorth.com/2007/06/04/hi-im-talkie-toaster-reborn/https://geekwhitenorth.com/wp-content/uploads/2007/06/c7a98-talkieendon.jpgc7a98-talkieendonTalkie toaster earshttps://geekwhitenorth.com/wp-content/uploads/2007/06/5c9ca-newsensor.jpg5c9ca-newsensorTalkie toaster eyeshttps://geekwhitenorth.com/wp-content/uploads/2007/06/523f1-talkieopen.jpg523f1-talkieopenRats nest of wires but they are all marked2017-08-17T01:53:48+00:00monthlyhttps://geekwhitenorth.com/2008/07/16/iron-man/https://geekwhitenorth.com/wp-content/uploads/2008/07/48c45-arcreactorlitup1.jpg48c45-arcreactorlitupArc reactor lit uphttps://geekwhitenorth.com/wp-content/uploads/2008/07/a11ed-arcreactorpedestal.jpga11ed-arcreactorpedestalArc reactor from the cavehttps://geekwhitenorth.com/wp-content/uploads/2008/07/48c45-arcreactorlitup.jpg48c45-arcreactorlitupA version 01 arc reactor2017-08-17T01:53:44+00:00monthlyhttps://geekwhitenorth.com/2009/07/08/all-hail-the-cyberking/https://geekwhitenorth.com/wp-content/uploads/2009/07/cyberking-s.jpgcyberking sDoll Cyber king complete with chair2017-08-17T01:53:40+00:00monthlyhttps://geekwhitenorth.com/2009/09/09/skull-and-cardboard/https://geekwhitenorth.com/wp-content/uploads/2009/09/skull-1.jpgskull-1Paper craft Terminator skull side viewhttps://geekwhitenorth.com/wp-content/uploads/2009/09/skull2.jpgskull2Paper craft Terminator skull2017-08-17T01:53:36+00:00monthlyhttps://geekwhitenorth.com/2011/07/31/arduino-not-harduino/https://geekwhitenorth.com/wp-content/uploads/2011/07/bope-3-glowing.jpgBOPE-3-GlowingAdd hinges, paint it up and add a creepy handhttps://geekwhitenorth.com/wp-content/uploads/2011/07/bope-4-crazy-wiring.jpgBOPE-4-crazy wiringSpaghetti wire as may LEDs as possiblehttps://geekwhitenorth.com/wp-content/uploads/2011/07/bope-2-cutout-pentagram.jpgBOPE-2-cutout pentagramSlice an eerie opening in the shape of a pentagram https://geekwhitenorth.com/wp-content/uploads/2011/07/bope-1-starting-book.jpgBOPE-1-starting book-A large "book" type box2017-08-17T01:53:32+00:00monthlyhttps://geekwhitenorth.com/2011/10/01/sacre-bleu-hockey-fans-dont-look-this-as-it-may-offend/https://geekwhitenorth.com/wp-content/uploads/2014/03/drd-hockey-helmet1.jpgdrd-Hockey helmet1Hockey helmet taken to pieces and lower edges cuthttps://geekwhitenorth.com/wp-content/uploads/2014/03/drd-1-hockey-helmet-1.jpgdrd-1-Hockey helmet 1Cutting into hockey helmethttps://geekwhitenorth.com/wp-content/uploads/2014/03/drd-paper-mache.jpgDRD-paper-macheInitial body outline2017-08-17T01:53:28+00:00monthlyhttps://geekwhitenorth.com/2012/01/10/this-is-your-brain-on-slurm/https://geekwhitenorth.com/wp-content/uploads/2012/01/bender-crosshatchhead-1-640.jpgBender-CrosshatchHead-1-640foam board domehttps://geekwhitenorth.com/wp-content/uploads/2012/01/body-tube1.jpgbody tube1Body sizehttps://geekwhitenorth.com/wp-content/uploads/2012/01/bender-head-1-640.jpgBender-head-1-640Bender head on body2017-08-17T01:53:24+00:00monthlyhttps://geekwhitenorth.com/2012/04/16/ive-got-wheels-and-know-how-to-use-them/https://geekwhitenorth.com/wp-content/uploads/2012/04/drd-wheels-with-bar-1050.jpgDRD-Wheels-with-bar-1050Wheels and chasis for DRDhttps://geekwhitenorth.com/wp-content/uploads/2012/04/drd-join-body-wheels-640.jpgDRD-join-body-wheels-640papier mache bodyhttps://geekwhitenorth.com/wp-content/uploads/2014/03/drd-join-body-wheels-640.jpgDRD-join-body-wheels-640Underneath look at the body shellhttps://geekwhitenorth.com/wp-content/uploads/2014/03/drd-wheels-with-bar-1050.jpgDRD-Wheels-with-bar-1050Chassis for driving DRD2017-08-17T01:53:20+00:00monthlyhttps://geekwhitenorth.com/2012/04/19/paint-sand-fill-paint-sand-fill/https://geekwhitenorth.com/wp-content/uploads/2014/03/drd-sand-fill-repeat-1050.jpgDRD-sand-fill-repeat-1050Side view features2017-08-17T01:53:16+00:00monthlyhttps://geekwhitenorth.com/2012/04/24/eye-lights/https://geekwhitenorth.com/wp-content/uploads/2014/03/drd-eye-light-1-1050-e1450232506988.jpgDRD-eye-light-1-1050Eye stalk with lighthttps://geekwhitenorth.com/wp-content/uploads/2014/03/drd-eye-bits-1-1050.jpgDRD-eye-bits-1-1050Making eye stalkshttps://geekwhitenorth.com/wp-content/uploads/2014/03/drd-eyestalk-640.jpgDRD-Eyestalk-640Electric eye2017-08-17T01:53:12+00:00monthlyhttps://geekwhitenorth.com/2012/05/26/dont-bat-an-eye/https://geekwhitenorth.com/wp-content/uploads/2014/03/drd-eyes-inished-1050.jpgDRD-eyes-inished-1050Eye stalk painted2017-08-17T01:53:09+00:00monthlyhttps://geekwhitenorth.com/2012/05/28/tricolore/https://geekwhitenorth.com/wp-content/uploads/2012/05/drd-initial-paint-2-1050.jpgDRD-initial-paint-2-1050Top view of the bodyhttps://geekwhitenorth.com/wp-content/uploads/2012/05/drd-initial-paint-1-1050.jpgDRD-initial-paint-1-1050front view of bodyhttps://geekwhitenorth.com/wp-content/uploads/2014/03/drd-initial-paint-2-1050.jpgDRD-initial-paint-2-1050back view of painted bodyhttps://geekwhitenorth.com/wp-content/uploads/2014/03/drd-initial-paint-1-1050.jpgDRD-initial-paint-1-1050Initial paint job for body2017-08-17T01:53:05+00:00monthlyhttps://geekwhitenorth.com/2012/06/26/whistle-while-you-work-1812-style/https://geekwhitenorth.com/wp-content/uploads/2012/06/drd-sr-1.jpgDRD-SR-1Voice direct board and carrier breadboardhttps://geekwhitenorth.com/wp-content/uploads/2014/03/drd-sr-1.jpgDRD-SR-1Voice recognition board2017-08-17T01:53:01+00:00monthlyhttps://geekwhitenorth.com/2012/10/17/eye-stalks/https://geekwhitenorth.com/wp-content/uploads/2012/10/drd-eyestalks-1050.jpgDRD-eyestalks-1050DRD 1812 painted with eye stalkhttps://geekwhitenorth.com/wp-content/uploads/2014/03/drd-eyestalks-1050.jpgDRD-eyestalks-1050Eye stalk added to body of DRD2017-08-17T01:52:56+00:00monthlyhttps://geekwhitenorth.com/2012/10/17/a-sound-arduino-sandwich/https://geekwhitenorth.com/wp-content/uploads/2012/10/drd-isd-sound-board-1-1050.jpgDRD-ISD-sound-board-1-1050Arduino, sound board and voice boardhttps://geekwhitenorth.com/wp-content/uploads/2012/10/drd-electronics-1-1050.jpgDRD-Electronics-1-1050Testing and programming the soundhttps://geekwhitenorth.com/wp-content/uploads/2014/03/drd-isd-sound-board-1-1050.jpgDRD-ISD-sound board-1-1050Voice shieldhttps://geekwhitenorth.com/wp-content/uploads/2014/03/drd-electronics-1-1050.jpgDRD-Electronics-1-1050Voice recognition board2017-08-17T01:52:52+00:00monthlyhttps://geekwhitenorth.com/2006/01/31/the-plan-part1/https://geekwhitenorth.com/wp-content/uploads/2006/01/dalek-finished-1.jpgdalek finished-1Finished Dalek on display2017-08-17T01:51:04+00:00monthlyhttps://geekwhitenorth.com/2006/01/31/the-plan-part2/https://geekwhitenorth.com/wp-content/uploads/2006/01/dalek-skirt-and-shoulders1.jpgdalek skirt and shoulders1Dalek skirt and shouldershttps://geekwhitenorth.com/wp-content/uploads/2006/01/dalek-balls.jpgdalek ballsBalls ready for painting2017-08-17T01:50:59+00:00monthlyhttps://geekwhitenorth.com/2006/05/31/easy-twist-off-dome/https://geekwhitenorth.com/wp-content/uploads/2006/05/qtrtwist2.jpgqtrtwist2Quarter twist disconnects the neck and domehttps://geekwhitenorth.com/wp-content/uploads/2006/05/qtrtwist3.jpgqtrtwist3The quarter twist is in place2017-08-17T01:50:55+00:00monthlyhttps://geekwhitenorth.com/2006/05/31/the-bell-domes-for-you/https://geekwhitenorth.com/wp-content/uploads/2006/05/dalek-dome-1.jpgdalek dome 1Skull cap for Dalek2017-08-17T01:50:50+00:00monthlyhttps://geekwhitenorth.com/2006/05/31/paint-those-balls/2017-08-17T01:50:45+00:00monthlyhttps://geekwhitenorth.com/2006/05/31/coat-of-many-layers/https://geekwhitenorth.com/wp-content/uploads/2006/05/phot0058.jpgPHOT0058prior to paintinghttps://geekwhitenorth.com/wp-content/uploads/2006/05/phot0068.jpgPHOT0068Coat of grey paint2017-08-17T01:50:41+00:00monthlyhttps://geekwhitenorth.com/2006/05/31/photo-op/2017-08-17T01:50:37+00:00monthlyhttps://geekwhitenorth.com/2008/01/01/k-9-body/2017-08-17T01:50:32+00:00monthlyhttps://geekwhitenorth.com/2008/01/01/putting-k9-together/https://geekwhitenorth.com/wp-content/uploads/2008/01/b6f4.jpgb6f4Prototype headhttps://geekwhitenorth.com/wp-content/uploads/2008/01/6d23.jpg6d23The real head painted with primerhttps://geekwhitenorth.com/wp-content/uploads/2008/01/72e0.jpg72e0Hardboard bodyhttps://geekwhitenorth.com/wp-content/uploads/2008/01/d9df.jpgd9dfPrimer added to bodyhttps://geekwhitenorth.com/wp-content/uploads/2008/01/a47a.jpga47aK9 you want to go outside?https://geekwhitenorth.com/wp-content/uploads/2008/01/88e2.jpg88e2K9 front view2017-08-17T01:50:25+00:00monthlyhttps://geekwhitenorth.com/2008/01/01/adding-life/2017-08-17T01:50:21+00:00monthlyhttps://geekwhitenorth.com/2008/12/31/yes-master/2017-08-17T01:50:17+00:00monthlyhttps://geekwhitenorth.com/2012/01/01/a-new-year-a-new-dalek/https://geekwhitenorth.com/wp-content/uploads/2012/01/tommy-skirt-panels-1.jpgTommy-skirt-panels-1All the skirt panelshttps://geekwhitenorth.com/wp-content/uploads/2012/01/tommy-base-1.jpgTommy-base-1Finished basehttps://geekwhitenorth.com/wp-content/uploads/2012/01/tommy-base-2.jpgTommy-base-2Underside view of the basehttps://geekwhitenorth.com/wp-content/uploads/2012/01/tommy-base-3.jpgTommy-base-3Foam board bumper edges2017-08-17T01:50:08+00:00monthlyhttps://geekwhitenorth.com/2012/01/07/mini-me-appearance-was-quite-moving/https://geekwhitenorth.com/wp-content/uploads/2012/01/cct2011-thunderbirds-1.jpgCCT2011-Thunderbirds-1Not Thunderbird 7https://geekwhitenorth.com/wp-content/uploads/2012/01/cct2011-fitted-to-mm.jpgCCT2011-Fitted to MMLooking down into the skirt2017-08-17T01:50:03+00:00monthlyhttps://geekwhitenorth.com/2012/01/19/ooo-look-at-my-skirt/https://geekwhitenorth.com/wp-content/uploads/2012/01/tommy-base-glue-skirt-4-640.jpgTommy-base-glue-skirt-4-640insert flap A into slot Bhttps://geekwhitenorth.com/wp-content/uploads/2012/01/tommy-base-glue-skirt-3-640.jpgTommy-base-glue-skirt-3-640waiting for glue to dryhttps://geekwhitenorth.com/wp-content/uploads/2012/01/tommy-base-skirt-2-640.jpgTommy-base-skirt-2-640Skirt assembledhttps://geekwhitenorth.com/wp-content/uploads/2012/01/tommy-base-glue-skirt-5-640.jpgTommy-base-glue-skirt-5-640Skirt assemblyhttps://geekwhitenorth.com/wp-content/uploads/2012/01/tommy-base-skirt-1-640.jpgTommy-base-skirt-1-640Foam board skirt2017-08-17T01:49:58+00:00monthlyhttps://geekwhitenorth.com/2012/01/28/dollar-store-blues/https://geekwhitenorth.com/wp-content/uploads/2012/01/tommy-bluelight-2.jpgTommy-bluelight-2Dollar store bargin LED strip lighthttps://geekwhitenorth.com/wp-content/uploads/2012/01/tommy-bluelight-3.jpgTommy-bluelight-3-Inside the Led strip lightshttps://geekwhitenorth.com/wp-content/uploads/2012/01/tommy-bluelight-1.jpgTommy-bluelight-1elevate! 2017-08-17T01:49:54+00:00monthlyhttps://geekwhitenorth.com/2012/12/01/flat-pack-dome/https://geekwhitenorth.com/wp-content/uploads/2012/12/img_0675-resized.jpgIMG_0675.resizedHow do you place clamps on a domehttps://geekwhitenorth.com/wp-content/uploads/2012/12/img_0677-resized.jpgIMG_0677.resizedTop view of the domehttps://geekwhitenorth.com/wp-content/uploads/2012/12/img_0678-resized.jpgIMG_0678.resizedThe dome glued togetherhttps://geekwhitenorth.com/wp-content/uploads/2012/12/dome-papercraft1.pngDome-papercraft1Page 1 - A section of the flattened out designhttps://geekwhitenorth.com/wp-content/uploads/2012/12/img_0674-resized.jpgIMG_0674.resizedtabs and scores are all cut out and preparedhttps://geekwhitenorth.com/wp-content/uploads/2012/10/dome-papercraft1.pngDome papercraftPiece of the dome2017-08-17T01:49:49+00:00monthlyhttps://geekwhitenorth.com/2013/05/20/mmm-blueberry-paper-muffins/https://geekwhitenorth.com/wp-content/uploads/2013/05/eye-back-1.jpgeye-back-1Eyeball designed in pepakura2017-08-17T01:49:44+00:00monthlyhttps://geekwhitenorth.com/2013/05/25/on-the-shoulders-of-12-scale/https://geekwhitenorth.com/wp-content/uploads/2013/05/sh7.jpgsh7Foam board pieces added to shouldershttps://geekwhitenorth.com/wp-content/uploads/2013/05/sh2.jpgsh2template for foam board pieceshttps://geekwhitenorth.com/wp-content/uploads/2013/05/sh1.jpgsh1foam board pieceshttps://geekwhitenorth.com/wp-content/uploads/2013/05/sh3.jpgsh3Building up the shouldershttps://geekwhitenorth.com/wp-content/uploads/2013/05/sh9.jpgsh9Duct tape skinhttps://geekwhitenorth.com/wp-content/uploads/2013/05/sh11.jpgsh11skin template from built out shoulders2017-08-17T01:49:40+00:00monthlyhttps://geekwhitenorth.com/2013/05/26/not-seeing-straight/https://geekwhitenorth.com/wp-content/uploads/2013/05/sh13.jpgsh13Scored lines2017-08-17T01:49:35+00:00monthlyhttps://geekwhitenorth.com/2013/06/11/dr-slr/https://geekwhitenorth.com/wp-content/uploads/2013/06/eye-iris-1.jpgEye-Iris-1Future iris for eye2017-08-17T01:49:30+00:00monthlyhttps://geekwhitenorth.com/2013/06/12/suits-me-to-a-tea-ball/https://geekwhitenorth.com/wp-content/uploads/2013/06/eye2.jpgeye2eye balled shaped 2017-08-17T01:49:26+00:00monthlyhttps://geekwhitenorth.com/2013/06/13/light-up-my-eye-stalk/https://geekwhitenorth.com/wp-content/uploads/2013/06/eye4-resized.jpgeye4.resizedThe threaded light fitting will be the eyestalk2017-08-17T01:49:21+00:00monthlyhttps://geekwhitenorth.com/2013/06/14/duct-tape-servo/https://geekwhitenorth.com/wp-content/uploads/2013/06/eye21-resized.jpgeye21.resizedDuct tape to the rescue2017-08-17T01:49:16+00:00monthlyhttps://geekwhitenorth.com/2013/06/15/giant-eyeball/https://geekwhitenorth.com/wp-content/uploads/2013/06/eye20-resized.jpgeye20.resizedprototype back of eye2017-08-17T01:49:11+00:00monthlyhttps://geekwhitenorth.com/2013/06/16/eyeball-and-newspaper/https://geekwhitenorth.com/wp-content/uploads/2013/06/eye18-resized.jpgeye18.resizedBuilding up the back of the eye2017-08-17T01:49:06+00:00monthlyhttps://geekwhitenorth.com/2013/06/17/its-blue/https://geekwhitenorth.com/wp-content/uploads/2013/06/eye6-resized.jpgeye6.resizedBlue glow of the eye2017-08-17T01:49:01+00:00monthlyhttps://geekwhitenorth.com/2013/06/18/glad-you-are-a-servo/https://geekwhitenorth.com/wp-content/uploads/2013/06/eye5-resized.jpgeye5.resizedprototype iris moved by plastic reusable lid2017-08-17T01:48:56+00:00monthlyhttps://geekwhitenorth.com/2013/06/19/wheel-pivot/https://geekwhitenorth.com/wp-content/uploads/2013/06/eye17-resized.jpgeye17.resizedAn idea for eye stalk pivothttps://geekwhitenorth.com/wp-content/uploads/2013/06/eye16-resized.jpgeye16.resizedPrototype pivot2017-08-17T01:48:52+00:00monthlyhttps://geekwhitenorth.com/2013/06/20/eye-stalk-now-looking-good/https://geekwhitenorth.com/wp-content/uploads/2013/06/eye14-resized.jpgeye14.resizedprototype eye2017-08-17T01:48:47+00:00monthlyhttps://geekwhitenorth.com/2013/06/21/eye-inner-workings/https://geekwhitenorth.com/wp-content/uploads/2013/06/eye13-resized.jpgeye13.resizedEye servo prototype2017-08-17T01:48:42+00:00monthlyhttps://geekwhitenorth.com/2013/06/22/light-goes-on-light-goes-off/https://geekwhitenorth.com/wp-content/uploads/2013/06/eye12-resized.jpgeye12.resizedPrototype eye turned onhttps://geekwhitenorth.com/wp-content/uploads/2013/06/eye11-resized.jpgeye11.resizedprototype eye off2017-08-17T01:48:37+00:00monthlyhttps://geekwhitenorth.com/2013/06/23/933/https://geekwhitenorth.com/wp-content/uploads/2013/06/arm1-resized.jpgArm1.resizedArm detail prototype2017-08-17T01:48:32+00:00monthlyhttps://geekwhitenorth.com/2013/06/24/armies/https://geekwhitenorth.com/wp-content/uploads/2013/06/arm4-resized.jpgArm4.resizedFolded arm and glued2017-08-17T01:48:27+00:00monthlyhttps://geekwhitenorth.com/2013/06/25/the-arms-have-doubled-up/https://geekwhitenorth.com/wp-content/uploads/2013/06/arm3-resized.jpgArm3.resizedCardboard arms2017-08-17T01:48:22+00:00monthlyhttps://geekwhitenorth.com/2013/06/26/the-arms-have-a-home/https://geekwhitenorth.com/wp-content/uploads/2013/06/sh18-resized.jpgsh18-resizedView of both armshttps://geekwhitenorth.com/wp-content/uploads/2013/06/sh16-resized.jpgsh16-resizedArms into the body2017-08-17T01:48:17+00:00monthlyhttps://geekwhitenorth.com/2013/06/27/eyestalks-fine-details/https://geekwhitenorth.com/wp-content/uploads/2013/06/eye22resized.jpgEye22resizedprototype eye2017-08-17T01:48:13+00:00monthlyhttps://geekwhitenorth.com/2013/06/28/dome-markings/https://geekwhitenorth.com/wp-content/uploads/2013/06/dome9-resized.jpgdome9.resizedPepakura domehttps://geekwhitenorth.com/wp-content/uploads/2013/06/dome11-resized.jpgdome11.resizedMarkings2017-08-17T01:48:08+00:00monthlyhttps://geekwhitenorth.com/2013/06/29/painted-ear/https://geekwhitenorth.com/wp-content/uploads/2013/06/dome12-resized.jpgdome12.resizedprototype idea for Dalek ears2017-08-17T01:48:04+00:00monthlyhttps://geekwhitenorth.com/2013/10/28/knurled-shaft-indecision-ended/https://geekwhitenorth.com/wp-content/uploads/2013/10/arm6rs.pngArm6rsWhite glue to set shapehttps://geekwhitenorth.com/wp-content/uploads/2013/10/arm7rs.pngArm7rsprototype arms2017-08-17T01:47:59+00:00monthlyhttps://geekwhitenorth.com/2013/10/31/slats-of-fun/https://geekwhitenorth.com/wp-content/uploads/2013/10/sh19_resized.jpgsh19_resizedShoulder slats2017-08-17T01:47:55+00:00monthlyhttps://geekwhitenorth.com/2013/12/31/you-will-be-upgraded/https://geekwhitenorth.com/wp-content/uploads/2014/03/blueglow.jpgBlueglowMini-Me with upgraded hover effect2017-08-17T01:47:51+00:00monthlyhttps://geekwhitenorth.com/2014/10/22/it-looks-like-a-miniture-stargate/https://geekwhitenorth.com/wp-content/uploads/2014/10/middlering-e1445302195353.jpgMiddle RingLooks like a mini stargate2017-08-17T01:47:46+00:00monthlyhttps://geekwhitenorth.com/2014/10/23/looks-like-a-slice-of-pizza/https://geekwhitenorth.com/wp-content/uploads/2014/10/bottomringslice-e1445302165657.jpgPizzaA slice of the bottom neck ringhttps://geekwhitenorth.com/wp-content/uploads/2014/10/bottomring-e1445302180963.jpgbottom RingBase or bottom neck ring2017-08-17T01:47:42+00:00monthlyhttps://geekwhitenorth.com/2014/11/24/slice-and-dice/https://geekwhitenorth.com/wp-content/uploads/2014/11/painted-balls-e1439258669422.jpgPainted-ballsPaint those ballshttps://geekwhitenorth.com/wp-content/uploads/2014/11/painted-balls-0.jpgPainted-balls-0Logo for linux Distro Chameleonhttps://geekwhitenorth.com/wp-content/uploads/2014/11/cutballs-0-e1445302109355.jpgcutballs.0Half balls ready for paintinghttps://geekwhitenorth.com/wp-content/uploads/2014/11/cutballs-1-e1445302127287.jpgcutballs-1What are we in line for again?https://geekwhitenorth.com/wp-content/uploads/2014/11/balljig-0-e1445302140922.jpgBallJig-0Ancient torture devicehttps://geekwhitenorth.com/wp-content/uploads/2014/11/ball-jig-2-e1445302153885.jpgBall-jig-2Ready for the chop2017-08-17T01:47:38+00:00monthlyhttps://geekwhitenorth.com/2015/01/26/3d-experiments/https://geekwhitenorth.com/wp-content/uploads/2015/01/20150102_184822-e1445302085575.jpgEar experimentThe uprights are almost in exactly the right orientation2017-08-17T01:47:33+00:00monthlyhttps://geekwhitenorth.com/2015/01/28/domes-and-3d-prints/https://geekwhitenorth.com/wp-content/uploads/2015/01/d-top-bad-e1445302011728.jpgd-top-badWhen good prints go badhttps://geekwhitenorth.com/wp-content/uploads/2015/01/d-top-good-e1445302024682.jpgd-top-goodHow it should have looked2017-08-17T01:47:29+00:00monthlyhttps://geekwhitenorth.com/2015/02/04/bigger-than-the-gap-in-my-teeth/2017-08-17T01:47:24+00:00monthlyhttps://geekwhitenorth.com/2015/02/08/the-pieces-are-slowly-coming-together/https://geekwhitenorth.com/wp-content/uploads/2015/02/full-dome.jpgFull-DomeCAD screenshot of full domehttps://geekwhitenorth.com/wp-content/uploads/2015/02/dryfit-ring-pieces.jpgdryfit-ring-piecesDry fit of the pieceshttps://geekwhitenorth.com/wp-content/uploads/2015/02/lower-dome.jpgLower-DomeRing o Domehttps://geekwhitenorth.com/wp-content/uploads/2015/02/mid-dome-section.jpgMid dome sectionThe mid section without the top cap2017-08-17T01:47:20+00:00monthlyhttps://geekwhitenorth.com/2015/02/12/rule-britannia/https://geekwhitenorth.com/wp-content/uploads/2015/01/d-front-1-e1445302037599.jpgd-front-1Front viewhttps://geekwhitenorth.com/wp-content/uploads/2015/01/d-front-2-e1445302049762.jpgd-front-2Not a piano or a park benchhttps://geekwhitenorth.com/wp-content/uploads/2015/01/d-front-3-e1445302060726.jpgd-front-3Correct side uphttps://geekwhitenorth.com/wp-content/uploads/2015/01/d-front-f4-e1445302072244.jpgd-front-f4No support2017-08-17T01:47:15+00:00monthlyhttps://geekwhitenorth.com/2015/05/06/a-fit-test-of-the-emergency-broadcast-system-and-hot-glue/https://geekwhitenorth.com/wp-content/uploads/2015/05/upside-down-dome-e1445301869905.jpgupside down domeInside of the domehttps://geekwhitenorth.com/wp-content/uploads/2015/05/fit-testdome-3-e1445301910478.jpgFit-testdome-3left side viewhttps://geekwhitenorth.com/wp-content/uploads/2015/05/fit-testdome-4-e1445301922766.jpgFit-testdome-4top viewhttps://geekwhitenorth.com/wp-content/uploads/2015/05/fit-testdome-2-e1445301934212.jpgFit-testdome-2looking straight onhttps://geekwhitenorth.com/wp-content/uploads/2015/05/fit-testdome-1-e1445301945946.jpgFit-testdome-1right side view2017-08-17T01:47:10+00:00monthlyhttps://geekwhitenorth.com/2015/05/09/support-your-local-dome-rings/https://geekwhitenorth.com/wp-content/uploads/2015/05/supports-e1445301855195.jpgsupportsSupports for rings2017-08-17T01:47:06+00:00monthlyhttps://geekwhitenorth.com/2015/05/17/what-a-mesh/https://geekwhitenorth.com/wp-content/uploads/2015/05/plastic-canvas-e1445301881538.jpgplastic canvas10 count black plastic canvashttps://geekwhitenorth.com/wp-content/uploads/2015/05/mesh-e1445301895942.jpgmeshModified plastic canvas is now a mesh2017-08-17T01:47:02+00:00monthlyhttps://geekwhitenorth.com/2015/07/29/a-dome-of-many-colours-and-parts/https://geekwhitenorth.com/wp-content/uploads/2015/07/s-assembled-rings-2.jpgs-assembled rings 2Dry fit of dome and ringshttps://geekwhitenorth.com/wp-content/uploads/2015/07/s-assembled-rings-1.jpgs-assembled rings 1Rings and lazy susanhttps://geekwhitenorth.com/wp-content/uploads/2015/07/s-assembled-dome1.jpgs-assembled dome1Dome2017-08-17T01:46:57+00:00monthlyhttps://geekwhitenorth.com/2015/08/01/picture-of-progress/https://geekwhitenorth.com/wp-content/uploads/2015/07/s-sofarsogood.jpgs-SoFarSoGoodDry fit2017-08-17T01:46:51+00:00monthlyhttps://geekwhitenorth.com/2015/08/03/rings-and-things/https://geekwhitenorth.com/wp-content/uploads/2015/07/s-ball-and-oil-ring-e1445301835316.jpgs-ball and oil ringNote the cunning mounting system.2017-08-17T01:46:45+00:00monthlyhttps://geekwhitenorth.com/2015/08/10/turn-up-the-base/https://geekwhitenorth.com/wp-content/uploads/2015/08/base-e1444702750735.jpgBaseDalek Basehttps://geekwhitenorth.com/wp-content/uploads/2015/08/green_skirt-e1444702662526.jpgGreen_skirtSkirt and base2017-08-17T01:46:40+00:00monthlyhttps://geekwhitenorth.com/2015/09/27/just-need-painting/https://geekwhitenorth.com/wp-content/uploads/2015/08/production-line-e1445301744255.jpgproduction linelast batch seems like it took forever2017-08-17T01:46:36+00:00monthlyhttps://geekwhitenorth.com/2015/10/10/painted-and-ready-for-mounting/https://geekwhitenorth.com/wp-content/uploads/2015/10/s-ring-and-ball1.jpgs-ring-and-ballFinally got them painted2017-08-17T01:46:31+00:00monthlyhttps://geekwhitenorth.com/2015/11/10/take-the-plunge/https://geekwhitenorth.com/wp-content/uploads/2015/10/s-plunger-top-22.jpgs-plunger-top-2Close up of plungerhttps://geekwhitenorth.com/wp-content/uploads/2015/10/s-plunger-bot2.jpgs-plunger-botPlunger another viewhttps://geekwhitenorth.com/wp-content/uploads/2015/10/s-plunger-top1.jpgs-plunger-topUpside down view of plunger2017-08-17T01:46:26+00:00monthlyhttps://geekwhitenorth.com/2015/11/13/the-eyes-have-it/https://geekwhitenorth.com/wp-content/uploads/2015/10/s-eye-lens1.jpgs-eye-LensLed diffuserhttps://geekwhitenorth.com/wp-content/uploads/2015/10/s-eye-side1.jpgs-eye-side3d printed Dalek eyehttps://geekwhitenorth.com/wp-content/uploads/2015/10/s-eyeon1.jpgs-eyeonBlue light on https://geekwhitenorth.com/wp-content/uploads/2015/10/s-eyerings1.jpgs-eyeringsIn some countries these may be considered currency2017-08-17T01:46:22+00:00monthlyhttps://geekwhitenorth.com/2015/11/15/prototype-ear/https://geekwhitenorth.com/wp-content/uploads/2015/10/s-ear-21.jpgs-ear-2prototype first version of the earshttps://geekwhitenorth.com/wp-content/uploads/2015/10/s-ear-11.jpgDalek Ears translucentEar view of where the diode goeshttps://geekwhitenorth.com/wp-content/uploads/2015/10/s-ear1.jpgs-earEar and cage2017-08-17T01:46:17+00:00monthlyhttps://geekwhitenorth.com/2015/05/14/thoughts-on-printing-from-afar/https://geekwhitenorth.com/wp-content/uploads/2015/05/man-40093_1280-e1502934234665.pngman-40093_1280I think my printer has jammed2017-08-17T01:44:49+00:00monthlyhttps://geekwhitenorth.com/2016/10/11/that-snapping-noise-is-linux-coming-to-my-chromebook/https://geekwhitenorth.com/wp-content/uploads/2016/10/kdechromebook-e1475974977548.jpgkdechromebookKDE desktop residing on my Chromebook. (Kubuntu)2017-08-17T00:31:35+00:00monthlyhttps://geekwhitenorth.com/2015/03/16/korora-linux-vs-mageia-for-3d-printing/2017-08-17T00:29:54+00:00monthlyhttps://geekwhitenorth.com/2014/09/08/i-got-a-new-3d-printer-and-it-works-with-linux/https://geekwhitenorth.com/wp-content/uploads/2014/09/my3dprinter.jpgMy3dPrinterMy 3d printer right after assembly2017-08-16T18:00:20+00:00monthlyhttps://geekwhitenorth.com/2014/09/22/getting-the-3d-printer-assembled/https://geekwhitenorth.com/wp-content/uploads/2014/09/printing-something.jpgPrinting somethingOne of my first print attempts2017-08-16T18:00:17+00:00monthlyhttps://geekwhitenorth.com/2014/09/23/trying-to-connect-to-pronterface-using-linux/https://geekwhitenorth.com/wp-content/uploads/2014/09/test-pyramid-e1445302287734.jpgTest-pyramidPyramid of doomhttps://geekwhitenorth.com/wp-content/uploads/2014/09/test-cylinders-e1445302301626.jpgTest-cylinders3 cylinders2017-08-16T18:00:14+00:00monthlyhttps://geekwhitenorth.com/2014/09/24/3d-printer-7-steps-to-a-better-heated-bed/https://geekwhitenorth.com/wp-content/uploads/2014/09/messywires.jpgMessywiresThe curse of the messy wire2017-08-16T18:00:11+00:00monthlyhttps://geekwhitenorth.com/2014/09/28/winter-is-coming/https://geekwhitenorth.com/wp-content/uploads/2014/09/extraction1-e1445302273668.jpgextraction1Extraction team one swarm swarm swarm,2017-08-16T18:00:08+00:00monthlyhttps://geekwhitenorth.com/2014/10/11/a-hood-for-all-seasons/https://geekwhitenorth.com/wp-content/uploads/2014/09/hood2-e1490577851742.jpghood2Ready for actionhttps://geekwhitenorth.com/wp-content/uploads/2014/09/hood1-e1445302255897.jpgHood1Ready for sucking2017-08-16T18:00:05+00:00monthlyhttps://geekwhitenorth.com/2014/10/19/not-fuming-just-venting/https://geekwhitenorth.com/wp-content/uploads/2014/10/catapult-support-e1445302213355.jpgCatapult supportThe coloured areas are the areas I addedhttps://geekwhitenorth.com/wp-content/uploads/2014/10/catapult-e1445302229385.jpgcatapultPrinted in one piece2017-08-16T18:00:01+00:00monthlyhttps://geekwhitenorth.com/2015/01/25/the-property-of-a-lady/https://geekwhitenorth.com/wp-content/uploads/2015/01/fancy-box.jpgTudor fancy-boxA present for a lady2017-08-16T17:59:53+00:00monthlyhttps://geekwhitenorth.com/2015/02/01/i-should-have-read-my-horoscope/2017-08-16T17:59:43+00:00monthlyhttps://geekwhitenorth.com/2015/02/19/north-wind-really-blows/https://geekwhitenorth.com/wp-content/uploads/2015/02/draft-ex-1.jpgdraft-ex-1Flat wallhttps://geekwhitenorth.com/wp-content/uploads/2015/02/draft-ex-2-e1445301959157.jpgdraft-ex-2Corner wallhttps://geekwhitenorth.com/wp-content/uploads/2015/02/draft-ex-3-e1445301972566.jpgdraft-ex-3The curtains ready for actionhttps://geekwhitenorth.com/wp-content/uploads/2015/02/curtain-rod-holder-e1423932662733.jpgcurtain rod holderFits between two walls, one is flat the other a corner2017-08-16T17:59:35+00:00monthlyhttps://geekwhitenorth.com/2015/02/20/too-cold-to-print/2017-08-16T17:59:33+00:00monthlyhttps://geekwhitenorth.com/2015/04/15/octoprint-a-quick-testdrive/2017-08-16T17:59:26+00:00monthlyhttps://geekwhitenorth.com/2015/07/05/linux-stop-motion/2017-08-16T17:59:19+00:00monthlyhttps://geekwhitenorth.com/2015/08/06/printing-from-afar-redux/https://geekwhitenorth.com/wp-content/uploads/2015/11/burnt-150x150.jpgburnt-150x150Meltedhttps://geekwhitenorth.com/wp-content/uploads/2015/08/s-burnt-2-e1445301774125.jpgs-burnt-2Rating of connector2017-08-16T17:59:16+00:00monthlyhttps://geekwhitenorth.com/2015/08/09/i-love-the-smell-of-burning-semiconductors-in-the-morning/2017-08-16T17:59:13+00:00monthlyhttps://geekwhitenorth.com/2016/02/21/and-the-white-knight-is-talking-backwards/https://geekwhitenorth.com/wp-content/uploads/2016/02/whiteknight.jpgwhite knightRemember what the dormouse said2017-08-16T17:59:10+00:00monthlyhttps://geekwhitenorth.com/2016/04/04/the-same-but-smaller/https://geekwhitenorth.com/wp-content/uploads/2016/04/fabrikator-m1-e1459738350382.jpgFabrikator-MIt looks really big when I zoom in close2017-08-16T17:59:06+00:00monthlyhttps://geekwhitenorth.com/2016/05/19/fabrikator-mini-a-dollar-for-your-thoughts/https://geekwhitenorth.com/wp-content/uploads/2016/05/keyring.jpgkeyringKeep a loonie on your keychain2017-08-16T17:59:03+00:00monthlyhttps://geekwhitenorth.com/2016/06/29/learning-experience-unused-features/https://geekwhitenorth.com/wp-content/uploads/2016/06/2gb-1-e1467160361847.jpg2gb-1Who knew a 2 GB SDcard could be useful.2017-08-16T17:59:00+00:00monthlyhttps://geekwhitenorth.com/2016/07/19/plan-b-from-outta-da-kitchen/https://geekwhitenorth.com/wp-content/uploads/2016/07/joiner.pngjoinerjoining piecehttps://geekwhitenorth.com/wp-content/uploads/2016/07/corners.pngcornersHoly Customisation Batman!https://geekwhitenorth.com/wp-content/uploads/2016/07/10inchdisplay-e1468805008528.jpg10inchdisplayNo way to hold ithttps://geekwhitenorth.com/wp-content/uploads/2016/07/screenholder.pngscreenholderElaborate screen holder2017-08-16T17:58:57+00:00monthlyhttps://geekwhitenorth.com/2016/07/22/the-l-word/https://geekwhitenorth.com/wp-content/uploads/2016/07/metal-inserts-e1468974936532.jpgmetal-insertsMetal insertshttps://geekwhitenorth.com/wp-content/uploads/2016/07/wires-everywhere-e1468974921665.jpgwires-everywhereWires, wires everywherehttps://geekwhitenorth.com/wp-content/uploads/2016/07/frame-e1468974851493.jpgFrameL shaped pieces joined together2017-08-16T17:58:53+00:00monthlyhttps://geekwhitenorth.com/2016/07/25/ive-been-framed/https://geekwhitenorth.com/wp-content/uploads/2016/07/holding-board-e1468974902200.jpgHolding-boardSlot in side of Pi wall holds the interface boardhttps://geekwhitenorth.com/wp-content/uploads/2016/07/pi-enclosure-e1468974884367.jpgPi-Enclosure3d printed PI enclosurehttps://geekwhitenorth.com/wp-content/uploads/2016/07/pi-braces-e1468974869285.jpgPi-BracesBraces for the Pi2017-08-16T17:58:50+00:00monthlyhttps://geekwhitenorth.com/2016/07/29/hinged-and-bracket/https://geekwhitenorth.com/wp-content/uploads/2016/07/bracket.jpgBracketE shaped brackethttps://geekwhitenorth.com/wp-content/uploads/2016/07/unhinged.jpgunhingedCad view of the hinge https://geekwhitenorth.com/wp-content/uploads/2016/07/hinged.jpghingedsecond part of hinge.https://geekwhitenorth.com/wp-content/uploads/2016/07/hinge-e1468981204137.jpgHinge2 piece hinge2017-08-16T17:58:47+00:00monthlyhttps://geekwhitenorth.com/2016/08/05/know-when-to-hold-them/https://geekwhitenorth.com/wp-content/uploads/2016/08/backviewofscreen2-e1469844515484.jpgBackviewofscreenPi screen standhttps://geekwhitenorth.com/wp-content/uploads/2016/07/lcd-earings.jpgLCD-earingsNew earring fashion2017-08-16T17:58:44+00:00monthlyhttps://geekwhitenorth.com/2016/08/09/the-best-laid-plans-of-touch-screens-and-men/https://geekwhitenorth.com/wp-content/uploads/2016/08/touch-me-e1470014204568.jpgtouch-meTouch-UI interface setup on Raspberry Pi https://geekwhitenorth.com/wp-content/uploads/2016/08/powersupplyholder-e1469496653931.jpgPowersupplyholderThis is your brain on 3d printinghttps://geekwhitenorth.com/wp-content/uploads/2016/08/powersupplyholder-2-e1470627917871.jpgpowersupplyholder-2Power supply holder2017-08-16T17:58:41+00:00monthlyhttps://geekwhitenorth.com/2016/08/12/i-should-be-so-lack-y/https://geekwhitenorth.com/wp-content/uploads/2016/08/lacktable-e1470627800115.jpgLacktable2017-08-16T17:58:38+00:00monthlyhttps://geekwhitenorth.com/2016/08/16/seeing-double/2017-08-16T17:58:35+00:00monthlyhttps://geekwhitenorth.com/2016/08/19/i-can-see-clearly-now-the-top-is-gone/https://geekwhitenorth.com/wp-content/uploads/2016/08/theres-a-hole-in-my-lack-e1471221174906.jpgTheres-a-hole-in-my-LackThere is a hole in my Lack dear Lisa2017-08-16T17:58:32+00:00monthlyhttps://geekwhitenorth.com/2016/08/23/a-million-monkeys-and-a-million-lack-tables/https://geekwhitenorth.com/wp-content/uploads/2016/08/goldfishbowl-e1471223727254.jpggoldfishbowlM. C. Escher has nothing on this2017-08-16T17:58:29+00:00monthlyhttps://geekwhitenorth.com/2016/10/03/got-my-back/https://geekwhitenorth.com/wp-content/uploads/2016/10/its-back-e1475377645939.jpgits-backHolding the power2017-08-16T17:58:26+00:00monthlyhttps://geekwhitenorth.com/2016/10/06/turn-the-table/https://geekwhitenorth.com/wp-content/uploads/2016/10/ramps-back-fan-e1475459864226.jpgramps-back-fanQuick disconnect vent hose will allow easy access.2017-08-16T17:58:20+00:00monthlyhttps://geekwhitenorth.com/2017/03/30/waking-from-my-winter-hibernation/https://geekwhitenorth.com/wp-content/uploads/2017/03/mini-e1490577634353.jpgmini-shelfA new location for Fabrikator mini2017-08-16T17:58:18+00:00monthlyhttps://geekwhitenorth.com/2017/04/02/fan-of-the-all-metal-hot-end/https://geekwhitenorth.com/wp-content/uploads/2017/03/e3dv6upgrade-e1490494478535.jpgE3Dv6upgradeE3D Version 6 upgrade2017-08-16T17:58:15+00:00monthlyhttps://geekwhitenorth.com/2017/05/10/there-is-an-old-printer-and-its-printing-hot-behind-the-clear-door/https://geekwhitenorth.com/wp-content/uploads/2017/04/picam-e1491873741563.jpgPiCamHolder with long ribbon cable.https://geekwhitenorth.com/wp-content/uploads/2017/04/brighter-e1491873709279.jpgbrighterIn through the bright door2017-08-16T17:58:09+00:00monthlyhttps://geekwhitenorth.com/2017/05/23/inside-the-windy-city/https://geekwhitenorth.com/wp-content/uploads/2017/05/testprints-e1494726926555.jpgtestPrintsQbert times 32017-08-16T17:58:04+00:00monthlyhttps://geekwhitenorth.com/2017/08/01/troubleshooting-3d-printer-heated-bed-slow-to-heat-up/https://geekwhitenorth.com/wp-content/uploads/2017/05/image-3.pngimage (3)https://geekwhitenorth.com/wp-content/uploads/2017/05/image-1.pngimage (1)https://geekwhitenorth.com/wp-content/uploads/2017/05/image.pngimagehttps://geekwhitenorth.com/wp-content/uploads/2017/05/allvoltages3.jpgAllvoltagesHeating time of different voltages during troubleshooting process 2017-08-16T17:58:01+00:00monthlyhttps://geekwhitenorth.com/2017/08/08/play-away/https://geekwhitenorth.com/wp-content/uploads/2017/06/kindleholder.jpgKindleholderI can do it with my left or right hand2017-08-16T17:57:58+00:00monthlyhttps://geekwhitenorth.com/2016/08/01/kernel-virtualbox/https://geekwhitenorth.com/wp-content/uploads/2016/03/vbox-error.pngVbox errorKernel driver not installed2016-07-30T01:55:19+00:00monthlyhttps://geekwhitenorth.com/2016/04/11/setting-up-the-fabrikator-mini-with-linux/https://geekwhitenorth.com/wp-content/uploads/2016/04/first-print-fab-mini-1-e1459738371381.jpgfirst print fab mini-1First print on Fabrikator Mini2016-04-23T01:54:02+00:00monthlyhttps://geekwhitenorth.com/prop-building-geek/dalek-html/2016-03-07T02:15:41+00:00weekly0.6https://geekwhitenorth.com/2015/10/11/how-does-your-garden-grow/2016-03-06T01:26:55+00:00monthlyhttps://geekwhitenorth.com/2006/11/07/halloween-project/https://geekwhitenorth.com/wp-content/uploads/2006/11/phot0025.jpgPHOT0025Spooky candy bucket Halloween 20062016-03-05T22:54:44+00:00monthlyhttps://geekwhitenorth.com/2006/05/31/a-servo-motor-for-mini-me-dalek/https://geekwhitenorth.com/wp-content/uploads/2006/05/3dpcb.jpg3dpcbServo board image done in KiCad2016-03-05T22:51:57+00:00monthlyhttps://geekwhitenorth.com/2011/12/15/mini-me-trip-to-chicago-tardis-2011/https://geekwhitenorth.com/wp-content/uploads/2011/12/cct2011-fan_club.jpgCCT2011-Fan_club"Oh, Mini-Me, you're so dreamy"https://geekwhitenorth.com/wp-content/uploads/2011/12/cct2011-night-on-the-town.jpgCCT2011 night on the townOne day when your as big as me your base will glow blue toohttps://geekwhitenorth.com/wp-content/uploads/2011/12/cct2011-standoff.jpgCCT2011-StandoffYou shall not passhttps://geekwhitenorth.com/wp-content/uploads/2011/12/cct2011-kick-me.jpgCCT2011-Kick meAre you my master? No I am a superior being. Now, stop bothering me.2016-03-05T22:49:08+00:00monthlyhttps://geekwhitenorth.com/2012/12/03/sonic-screwdrivers-chicago-tardis/https://geekwhitenorth.com/wp-content/uploads/2012/12/ct2012-0071.jpgCT2012-007Madame vastrahttps://geekwhitenorth.com/wp-content/uploads/2012/12/ct2012-0161.jpgCT2012-016Just like clockworkhttps://geekwhitenorth.com/wp-content/uploads/2012/12/ct2012-0131.jpgCT2012-013Special Dalekhttps://geekwhitenorth.com/wp-content/uploads/2012/12/ct2012-015.jpgCT2012-015Stay where you are, this sonic screwdriver is set to Dalekhttps://geekwhitenorth.com/wp-content/uploads/2012/12/ct2012-017.jpgCT2012-017Want to buy a sonic screwdriver?https://geekwhitenorth.com/wp-content/uploads/2012/12/ct2012-006.jpgCT2012-006Please do not touch. I exterminate people who touchhttps://geekwhitenorth.com/wp-content/uploads/2012/12/ct2012-012.jpgCT2012-012Wow I am bushed, time to take a resthttps://geekwhitenorth.com/wp-content/uploads/2012/12/ct2012-003.jpgCT2012-003Give me your lunch money and next time I want you to do my home work2016-03-05T22:48:09+00:00monthlyhttps://geekwhitenorth.com/2013/07/01/i-got-a-raspberry-pi-now-what/2016-03-05T22:23:20+00:00monthlyhttps://geekwhitenorth.com/2013/07/04/i-got-a-raspberry-pi-now-i-need-a-suitable-distro-for-a-touch-screen/2016-03-05T22:22:22+00:00monthlyhttps://geekwhitenorth.com/2013/10/16/all-rounded-lcd-screen-holder/https://geekwhitenorth.com/wp-content/uploads/2013/10/pi-holder-1.jpgPi holder-1Artist concept2016-03-05T22:21:31+00:00monthlyhttps://geekwhitenorth.com/2013/10/17/print-cut-and-glue/https://geekwhitenorth.com/wp-content/uploads/2013/10/pi-holder2.jpgPi holder2Pepakura printout 2016-03-05T22:19:42+00:00monthlyhttps://geekwhitenorth.com/2013/10/18/scoring-some-lines/https://geekwhitenorth.com/wp-content/uploads/2013/10/pi-holder3_4.jpgPi holder3_4Front pieces of console2016-03-05T22:19:16+00:00monthlyhttps://geekwhitenorth.com/2013/10/19/swan-shaped-sides/https://geekwhitenorth.com/wp-content/uploads/2013/10/pi-holder4-1-modified_1.jpgPi holder4-1 (Modified)_1Maybe 2 herons mating2016-03-05T22:18:45+00:00monthlyhttps://geekwhitenorth.com/2013/10/20/shortfrontbackandside/https://geekwhitenorth.com/wp-content/uploads/2013/10/pi-holder6-modified_1.jpgPi holder6 (Modified)_1prototype viewhttps://geekwhitenorth.com/wp-content/uploads/2013/10/pi-holder5-modified-1_2.jpgPi holder5 (Modified)-1_2Glued together2016-03-05T22:18:03+00:00monthlyhttps://geekwhitenorth.com/2014/06/29/chicago-tardis-2013/https://geekwhitenorth.com/wp-content/uploads/2014/06/1471781_10152393883464942_335626571_n.jpg1471781_10152393883464942_335626571_nI hope you washed the handhttps://geekwhitenorth.com/wp-content/uploads/2014/06/1415087_10152393883164942_1304134029_o-e1439259038276.jpg1415087_10152393883164942_1304134029_oPhew no one saw mehttps://geekwhitenorth.com/wp-content/uploads/2014/06/1401958_10152393880459942_1779682224_o-e1445302498168.jpg1401958_10152393880459942_1779682224_oOk I will be signing autographs laterhttps://geekwhitenorth.com/wp-content/uploads/2014/06/1401528_10152393879314942_311271196_o-e1439259831356.jpg1401528_10152393879314942_311271196_oI am surroundedhttps://geekwhitenorth.com/wp-content/uploads/2014/06/1400282_10152393878954942_605548106_o-e1439259852516.jpg1400282_10152393878954942_605548106_oYou can only do it once for good luckhttps://geekwhitenorth.com/wp-content/uploads/2014/06/1398879_10152393880154942_1303581537_o-e1439259873545.jpg1398879_10152393880154942_1303581537_oHigh plunger!https://geekwhitenorth.com/wp-content/uploads/2014/06/1398765_10152393880554942_2061245990_o-e1439259909551.jpg1398765_10152393880554942_2061245990_oI am feeling a little queeeeesyhttps://geekwhitenorth.com/wp-content/uploads/2014/06/ct2013-4-e1439259945719.pngCT2013-4I saw you move - go back one giant stephttps://geekwhitenorth.com/wp-content/uploads/2014/06/ct2013-3-e1439259973569.pngCT2013-3Now for a quick dash and hopefully they will not notice I have gonehttps://geekwhitenorth.com/wp-content/uploads/2014/06/ct2013-2.pngCt2013-2You don't have to shout, I am the one that shouts.2016-03-05T22:12:26+00:00monthlyhttps://geekwhitenorth.com/2014/07/02/long-cold-winter/2016-03-05T22:11:28+00:00monthlyhttps://geekwhitenorth.com/2014/06/28/busy-6-months/https://geekwhitenorth.com/wp-content/uploads/2015/08/rp2013-minime.jpgRP2013-minimeMiniMehttps://geekwhitenorth.com/wp-content/uploads/2014/06/rp2013-sil.jpgRP2013-SilDid not notice you therehttps://geekwhitenorth.com/wp-content/uploads/2014/06/rp2013-cm-e1439260001254.jpgRP2013-CMsomeone will make a monkey out of youhttps://geekwhitenorth.com/wp-content/uploads/2014/06/rp2013-red-e1439259525519.jpgRP2013-redclassic style colorshttps://geekwhitenorth.com/wp-content/uploads/2014/06/rp2013-angel-e1439259509417.jpgRP2013-AngelI am sure that just movedhttps://geekwhitenorth.com/wp-content/uploads/2014/06/rp2013-w-e1439259484563.jpgRP2013-WOK what ever you wanthttps://geekwhitenorth.com/wp-content/uploads/2014/06/rp2013-cat-e1439259459308.jpgRP2013-CATMeeeow, it's Novice Hamehttps://geekwhitenorth.com/wp-content/uploads/2014/06/rp2013-is-e1439259433440.jpgRP2013-ISPut that light out can't you see there is a war onhttps://geekwhitenorth.com/wp-content/uploads/2014/06/rp2013-k9-e1439259393230.jpgRP2013-K9K9https://geekwhitenorth.com/wp-content/uploads/2014/06/rp2013-bw-e1439259365811.jpgRP2013-BWClassic style Dalek2016-03-05T22:10:56+00:00monthlyhttps://geekwhitenorth.com/2009/07/03/linux-on-an-old-dell-3800-inspiron-laptop/2016-03-01T01:46:16+00:00monthlyhttps://geekwhitenorth.com/2009/08/28/two-monitors-linux-and-an-ati-card-woes/2016-03-01T01:46:04+00:00monthlyhttps://geekwhitenorth.com/2009/10/30/vectorlinux-on-a-dell-3800-inspiron-laptop-final-answer/2016-03-01T01:45:43+00:00monthlyhttps://geekwhitenorth.com/2010/01/20/leaving-deb-by-for-opensuse-ie-part-1/2016-03-01T01:45:31+00:00monthlyhttps://geekwhitenorth.com/2010/01/22/leaving-deb-by-for-opensuse-ie-part-2/2016-03-01T01:45:18+00:00monthlyhttps://geekwhitenorth.com/2010/07/04/that-was-a-bsd-of-an-installation-cage-match/2016-03-01T01:45:06+00:00monthlyhttps://geekwhitenorth.com/2010/07/07/the-addiction-is-not-satisfied/2016-03-01T01:44:53+00:00monthlyhttps://geekwhitenorth.com/2010/10/27/could-not-boot-a-live-linux-cd-what-is-going-on/2016-03-01T01:44:41+00:00monthlyhttps://geekwhitenorth.com/2010/11/02/now-windows7-dual-boot-with-linux-and-say-sorry/2016-03-01T01:44:28+00:00monthlyhttps://geekwhitenorth.com/2013/06/30/a-year-of-korora-linux/2016-03-01T01:44:12+00:00monthlyhttps://geekwhitenorth.com/2013/10/22/backup-you-must-before-new-distro-you-install-important-lessons-you-will-learn/2016-03-01T01:43:48+00:00monthlyhttps://geekwhitenorth.com/2013/10/23/if-it-looks-bad-it-then-it-is-probably-worse/2016-03-01T01:43:01+00:00monthlyhttps://geekwhitenorth.com/2014/06/30/sabayon-youre-cut-and-now-i-am-a-kde-convert/2016-03-01T01:42:47+00:00monthlyhttps://geekwhitenorth.com/2015/02/23/a-tale-of-2-monitors-and-3-kde-linux-distros/2016-03-01T01:40:28+00:00monthlyhttps://geekwhitenorth.com/2015/03/05/the-monitor-also-rises/2016-03-01T01:39:51+00:00monthlyhttps://geekwhitenorth.com/prop-building-geek/dalek-html/dalek-video/2016-02-14T14:58:27+00:00weekly0.6https://geekwhitenorth.com/linux-geek/2016-02-14T14:51:55+00:00weekly0.6https://geekwhitenorth.com/links/2015-12-28T03:37:07+00:00weekly0.6https://geekwhitenorth.com/about-2/2015-12-28T03:03:46+00:00weekly0.6https://geekwhitenorth.com/random-geek/2015-12-28T02:54:09+00:00weekly0.6https://geekwhitenorth.com/2009/12/03/550-miles-to-chicago-its-dark-and-were-wearing-sunglasses/https://geekwhitenorth.com/wp-content/uploads/2009/12/dalek-sec2.jpgdalek sec2First look at Dalek Sechttps://geekwhitenorth.com/wp-content/uploads/2009/12/pm3.jpgpm3Look over there2015-12-17T02:09:57+00:00monthlyhttps://geekwhitenorth.com/2010/10/26/hello-hp-do-you-read-me-hp/2015-11-25T02:46:30+00:00monthlyhttps://geekwhitenorth.com/2013/10/15/sabayon-first-thoughts/2015-11-24T03:20:53+00:00monthlyhttps://geekwhitenorth.com/3d-printer-geek/2014-09-14T20:09:51+00:00weekly0.6https://geekwhitenorth.com/robot-geek/2014-09-14T04:39:44+00:00weekly0.6https://geekwhitenorth.com/prop-building-geek/2014-09-14T04:29:20+00:00weekly0.6https://geekwhitenorth.com/servo-motor/2007-12-28T01:39:52+00:00weekly0.6https://geekwhitenorth.com/sound/2007-12-28T01:37:59+00:00weekly0.6https://geekwhitenorth.com/prop-building-geek/dalek-html/dalek-video-2/2007-12-27T19:42:40+00:00weekly0.6https://geekwhitenorth.com/prop-building-geek/dalek-html/dalek-pictures/2007-12-27T18:37:08+00:00weekly0.6https://geekwhitenorth.com/prop-building-geek/dalek-html/dalek-the-body/2007-12-27T18:36:57+00:00weekly0.6https://geekwhitenorth.com/prop-building-geek/dalek-html/dalek-electronics/2007-12-27T18:36:49+00:00weekly0.6https://geekwhitenorth.com/spooky-bucket/2007-12-26T20:51:06+00:00weekly0.6https://geekwhitenorth.comdaily1.02021-10-01T02:21:34+00:00